全部话筒

Stereo Pair

话筒配置
产品特点
更多有关规格
其他类似的DPA产品
用户体验
下载

选取您的话筒

配置

产品编号

数量

N/A

N/A € N/A

Request quote 储存到心愿单储存到心愿单

储存并退出

Stereo Kit options

The Stereo Kit is available with wide range of microphones and accessorie options. Choose the solution that fits your needs.

选项

储存并退出

N/A N/A N/A

前一页下一步储存并退出

立体声话筒套装

灵活的模块化设计 – 可互换式的话筒头和前置放大器
高达120 dB的动态范围
对射频有出色抗干扰能力(在> 60至> 40 dB之间)
频率极为线性
高声压级处理能力
高反啸前增益

我们的多功能的笔式话筒是高端录音和电影制作行业中的传奇。为工程师、广电业界及音乐家提供纯净，精确的声音还原。该系列的话筒经常得到专业人士选用，因为他们了解声音的好坏对作品是攸关重要的，故只坚持使用最好的话筒。

我们把所有屡获殊荣的笔型话筒匹配并组成特定的立体声对，视乎你选购的型号，它们的频响及灵敏度误差在±0.5 dB至 ±1.5 dB内

The stereo pair comes with Clips and Windscreens all packed in a Peli™ Case.

Explore specs

Omnis, cardioids or wide cardioids. Twin diaphragm miniature or 12 mm. Explore their unique specs here.

Explore specs

了解更多产品规格

Other models
- 4006A
- 4006C
- 4011A
- 4011C
- 2011A
- 2011C
- 2006A
- 2006C
- 4015A
- 4015C

产品规格

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Pre-polarized condenser

Frequency response

10 Hz - 20 kHz

Effective frequency range ±2 dB

10 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 250 Hz

40 mV/Pa; -28 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 27 dB (max. 29 dB)

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 124 dB

Max. SPL, THD 10%

146 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

163 g (5.7 oz)

Microphone diameter

16 - 19 mm (0.6 - 0.75 in)

Capsule diameter

16 mm (0.6 in)

Microphone length

170 mm (6.7 in)

Maximum output voltage, RMS

8.0 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90 %

Matching tolerance (frequency response and sensitivity)

±0.5 dB

Phase deviation for kit

< 5°

4006A Frequency response with free field grid

4006A-ddicate-4006A-Omni-Microphone-frequency-response.jpg

Typical on and off-axis response of a d:dicate™ 4006A Omnidirectional Microphone

Frequency response with close miking grid

4006A-ddicate-4006A-Omni-Microphone-frequency-response-close-miking-grid.jpg

Typical on-axis response of a 4006A with the trapezoid Close-miking Grid DD245

Frequency response with Diffuse field grid

4006A-ddicate-4006A-Omni-Microphone-frequency-response-diffuse-field-grid.jpg

Typical on-axis response of a 4006A with the black Diffuse-field Grid DD297

Frequency response with nose cone

4006A-ddicate-4006A-Omni-Microphone-frequency-response-nose-cone.jpg

Typical on-axis response of a 4006A with Nose Cone AU0777

Polar pattern with free field grid

Typical directional characteristics of a 4006A

Polar pattern with close miking grid

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-close-miking-grid.jpg

Typical directional characteristics of a 4006A with the trapezoid Close-miking Grid DD245 (Normalized)

Polar pattern with diffuse-field grid

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-diffuse-field-grid.jpg

Typical directional characteristics of a 4006A with the black Diffuse-field Grid DD297 (Normalized)

Polar pattern with nose cone

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-nose-cone.jpg

Typical directional characteristics of a 4006A with Nose Cone AU0777 (Normalized)

Polar pattern with nose cone - vertical

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-nose-cone-veritical.jpg

Typical directional characteristics of a 4006A with Nose Cone AU0777, vertical microphone orientation (Normalized)

产品规格

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Pre-polarized condenser

Frequency response

10 Hz - 20 kHz

Effective frequency range ±2 dB

20 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 250 Hz

40 mV/Pa; -28 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 27 dB (max. 29 dB)

Distortion, THD < 1%

131 dB SPL RMS, 134 dB SPL peak

Dynamic range

Typ. 119 dB

Max. SPL, THD 10%

139 dB SPL peak

Rated output impedance

100 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 50 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

63 g (2.2 oz)

Microphone diameter

16 - 19 mm (0.6 - 0.75 in)

Capsule diameter

16 mm (0.6 in)

Microphone length

64 mm (2.5 in)

Maximum output voltage, RMS

4.5 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±0.5 dB

Phase deviation for kit

< 5°

4006C Frequency response with free field grid

Typical on and off-axis response of a d:dicate™ 4006C Omnidirectional Microphone

Frequency response with close miking grid

Typical on-axis response of a 4006C with the trapezoid Close-miking Grid DD245

Frequency response with Diffuse field grid

Typical on-axis response of a 4006C with the black Diffuse-field Grid DD297

Frequency response with nose cone

Typical on-axis response of a 4006C with Nose Cone AU0777

Polar pattern with free field grid

Typical directional characteristics of a 4006C

Polar pattern with close miking grid

Typical directional characteristics of a 4006C with the trapezoid Close-miking Grid DD245 (Normalized)

Polar pattern with diffuse-field grid

Typical directional characteristics of a 4006C with the black Diffuse-field Grid DD297 (Normalized)

Polar pattern with nose cone

Typical directional characteristics of a 4006C with Nose Cone AU0777 (Normalized)

Polar pattern with nose cone - vertical

Typical directional characteristics of a 4006C with Nose Cone AU0777, vertical microphone orientation (Normalized)

产品规格

Directional pattern

Cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 30 cm (11.8 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, THD 10%

159 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

158 g (5.6 oz)

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

170 mm (6.7 in)

Maximum output voltage, RMS

> 5 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°

4011A Frequency response

4011A-ddicate-4011A-Cardioid-Microphone-frequency-response.jpg

Typical on and off-axis response of a d:dicate™ 4011A Cardioid Microphone

4011A Polar pattern

4011A-ddicate-4011A-Cardioid-Microphone-polar-pattern.jpg

Typical directional characteristics of a d:dicate™ 4011A Cardioid Microphone

产品规格

Directional pattern

Cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 30 cm (11.8 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, THD 10%

152 dB SPL peak

Rated output impedance

100 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 50 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

58 g (2 oz)

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

64 mm (2.5 in)

Maximum output voltage, RMS

> 4 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°

4011C Frequency response

Typical on and off-axis response of a d:dicate™ 4011C Cardioid Microphone

4011C Polar pattern

Typical directional characteristics of a d:dicate™ 4011C Cardioid Microphone

产品规格

Directional pattern

Cardioid

Principle of operation

Pressure gradient, with interference tube

Cartridge type

Pre-polarized condenser, Twin Diaphragm Capsule

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 30 cm (11.8 in)

50 Hz - 17 kHz with 3 dB soft boost at 12 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 33 dB (max. 36 dB)

Distortion, THD < 1%

134 dB SPL RMS, 137 dB SPL peak

Dynamic range

Typ. 117 dB

Max. SPL, THD 10%

153 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

164 g (5.8 oz)

Microphone diameter

19 mm (0.75 in)

Microphone length

198 mm (7.8 in)

Maximum output voltage, RMS

> 5 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Sensitivity selection tolerance (at 1 kHz)

±1.5 dB

2011A Frequency response

2011A-ddicate-2011A-Twin-Diaphragm-Cardioid-Microphone-frequency-response.jpg

Typical on and off-axis response of a d:dicate™ 2011A Cardioid Microphone

2011A Polar pattern

2011A-ddicate-2011A-Twin-Diaphragm-Cardioid-Microphone-polar-pattern.jpg

Typical directional characteristics of a d:dicate™ 2011A Cardioid Microphone

产品规格

Directional pattern

Cardioid

Principle of operation

Pressure gradient, with interference tube

Cartridge type

Pre-polarized condenser, Twin Diaphragm Capsule

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 30 cm (11.8 in)

50 Hz - 17 kHz with 3 dB soft boost at 12 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 33 dB (max. 36 dB)

Distortion, THD < 1%

134 dB SPL RMS, 137 dB SPL peak

Dynamic range

Typ. 117 dB

Max. SPL, THD 10%

146 dB SPL peak

Rated output impedance

100 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 50 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

64 g (2.3 oz)

Microphone diameter

19 mm (0.75 in)

Microphone length

92 mm (3.6 in)

Maximum output voltage, RMS

> 4 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Sensitivity selection tolerance (at 1 kHz)

±1.5 dB

2011C Frequency response

Typical on and off-axis response of a d:dicate™ 2011C Cardioid Microphone

2011C Polar pattern

4061-OC-C-dscreet-CORE-4061-Omni-Mic-Loud-SPL-Polar-Pattern.jpg

Typical directional characteristics of a d:dicate™ 2011C Cardioid Microphone

产品规格

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Pre-polarized condenser, Twin Diaphragm Capsule

Frequency response

20 Hz - 20 kHz

Effective frequency range ±2 dB

50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

40 mV/Pa; -28 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 28 dB (max. 30 dB)

Distortion, THD < 1%

127 dB SPL RMS, 130 dB SPL peak

Dynamic range

Typ. 114 dB

Max. SPL, THD 10%

146 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

160 g (5.6 oz)

Microphone diameter

19 mm (0.75 in)

Microphone length

164 mm (6.5 in)

Maximum output voltage, RMS

8 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Sensitivity selection tolerance (at 1 kHz)

±1.5 dB

2011A Frequency response

2006A-ddicate-2006A-Twin-Diaphragm-Omni-Microphone-frequency-response.jpg

Typical on and off-axis response of a d:dcate™ 2006A Omnidirectional Microphone

2006A Polar pattern

2006A-ddicate-2006A-Twin-Diaphragm-Omni-Microphone-polar-pattern.jpg

Typical directional characteristics of a d:dcate™ 2006A Omnidirectional Microphone

产品规格

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Pre-polarized condenser, Twin Diaphragm Capsule

Frequency response

20 Hz - 20 kHz

Effective frequency range ±2 dB

50 Hz - 20 kHz with typ. 3 dB soft boost at 14 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

40 mV/Pa; -28 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 28 dB (max. 30 dB)

Distortion, THD < 1%

127 dB SPL RMS, 130 dB SPL peak

Dynamic range

Typ. 114 dB

Max. SPL, THD 10%

139 dB SPL peak

Rated output impedance

100 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 50 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

60 g (2.1 oz)

Microphone diameter

19 mm (0.75 in)

Microphone length

58 mm (2.3 in)

Maximum output voltage, RMS

4.5 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Sensitivity selection tolerance (at 1 kHz)

±1.5 dB

2011C Frequency response

Typical on and off-axis response of a d:dcate™ 2006C Omnidirectional Microphone

2006C Polar pattern

Typical directional characteristics of a d:dcate™ 2006C Omnidirectional Microphone

产品规格

Directional pattern

Wide cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 60 cm (23.6 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, THD 10%

159 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

158 g (5.6 oz)

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

170 mm (6.7 in)

Maximum output voltage, RMS

> 5 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°

4015A Frequency response

4015-ddicate-4015-Wide-Cardioid-Microphone-frequency-response.jpg

Typical on and off-axis response of a 4015A

Polar pattern

Typical directional characteristics of a 4015A

产品规格

Directional pattern

Wide cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 60 cm (23.6 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, THD 10%

152 dB SPL peak

Rated output impedance

100 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 50 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

58 g (2 oz)

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

64 mm (2.5 in)

Maximum output voltage, RMS

> 4 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°

4015C Frequency response

Typical on and off-axis response of a 4015C

Polar pattern

Typical directional characteristics of a 4015C

去哪里买

你准备好买 DPA 话筒或它的配件吗? 让我们帮您找最接近您的商店

查找商店

类近的套装

立体声对

立体声对包含已配对的话筒组、话筒夹、防风罩及其他配件。套装内的话筒均作匹配，其误差值在 ±0.5 dB 或 ±1 dB 内(视乎不同套装)。4006、2011、2006、4007、4011 或 4015 均提供立体声套装

了解更多，配置您的立体声对

登記DPA通讯

抢先了解我们的新产品、工作坊、活动、比赛游戏及优惠等。

提交

DPA Microphones, Inc.

1500 Kansas Avenue, Unit 3A
Longmont, CO 80501
USA
Tel. +1 303-485-1025
联系我们

联系我们客户服务去哪里买

本网站使用cookies作业系统