全部话筒

立體聲套装 Stereo Kit

话筒配置
产品特点
更多有关规格
其他类似的DPA产品
用户体验
下载

选取您的话筒

配置

产品编号

数量

N/A

N/A € N/A

Request quote 储存到心愿单储存到心愿单

储存并退出

Stereo Kit options

The Stereo Kit is available with wide range of microphones and accessorie options. Choose the solution that fits your needs.

选项

储存并退出

N/A N/A N/A

前一页下一步储存并退出

经配对的立體聲對

灵活的模块化设计 – 可互换式的话筒头和前置放大器
高达120 dB的动态范围
对射频有出色抗干扰能力(在> 60至> 40 dB之间)
频率极为线性
高声压级处理能力
高反啸前增益

我们的多功能的笔式话筒是高端录音和电影制作行业中的传奇。为工程师、广电业界及音乐家提供纯净，精确的声音还原。该系列的话筒经常得到专业人士选用，因为他们了解声音的好坏对作品是攸关重要的，故只坚持使用最好的话筒。

我们把所有屡获殊荣的笔型话筒匹配并组成特定的立体声对，视乎你选购的型号，它们的频响及灵敏度误差在±0.5 dB至 ±1.5 dB内。

The kit includes mics, windscreens, boom, holders, clips, and much more.

Explore specs

Omnis or cardioids. 12 mm or 16 mm capsules. All with their particular advantages.

Explore specs

了解更多产品规格

Other models
- 4006A
- 4011A
- 4015A
- 4041-SP

产品规格

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Pre-polarized condenser

Frequency response

10 Hz - 20 kHz

Effective frequency range ±2 dB

10 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 250 Hz

S/N up to 3170324:
40 mV/Pa; -28 dB re. 1 V/Pa
S/N from 3170325:
36 mV/Pa; -28,9 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 27 dB (max. 29 dB)

Distortion, THD < 1%

S/N up to 3170324:
136 dB SPL RMS, 139 dB SPL peak
S/N from 3170325:
133 dB SPL RMS, 136 dB SPL peak

Dynamic range

S/N up to 3170324:
Typ. 124 dB
S/N from 3170325:
Typ. 121 dB

Max. SPL, THD 10%

146 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

163 g (5.7 oz)

Microphone diameter

16 - 19 mm (0.6 - 0.75 in)

Capsule diameter

16 mm (0.6 in)

Microphone length

170 mm (6.7 in)

Maximum output voltage, RMS

8 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90 %

Matching tolerance (frequency response and sensitivity)

±0.5 dB

Phase deviation for kit

< 5°

4006A Frequency response with free field grid

4006A-ddicate-4006A-Omni-Microphone-frequency-response.jpg

Typical on and off-axis response of a d:dicate™ 4006A Omnidirectional Microphone

Frequency response with close miking grid

4006A-ddicate-4006A-Omni-Microphone-frequency-response-close-miking-grid.jpg

Typical on-axis response of a 4006A with the trapezoid Close-miking Grid DD245

Frequency response with Diffuse field grid

4006A-ddicate-4006A-Omni-Microphone-frequency-response-diffuse-field-grid.jpg

Typical on-axis response of a 4006A with the black Diffuse-field Grid DD297

Frequency response with nose cone

4006A-ddicate-4006A-Omni-Microphone-frequency-response-nose-cone.jpg

Typical on-axis response of a 4006A with Nose Cone AU0777

Polar pattern with free field grid

Typical directional characteristics of a 4006A

Polar pattern with close miking grid

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-close-miking-grid.jpg

Typical directional characteristics of a 4006A with the trapezoid Close-miking Grid DD245 (Normalized)

Polar pattern with diffuse-field grid

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-diffuse-field-grid.jpg

Typical directional characteristics of a 4006A with the black Diffuse-field Grid DD297 (Normalized)

Polar pattern with nose cone

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-nose-cone.jpg

Typical directional characteristics of a 4006A with Nose Cone AU0777 (Normalized)

Polar pattern with nose cone - vertical

4006A-ddicate-4006A-Omni-Microphone-polar-pattern-nose-cone-veritical.jpg

Typical directional characteristics of a 4006A with Nose Cone AU0777, vertical microphone orientation (Normalized)

产品规格

Directional pattern

Cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 30 cm (11.8 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB (max. 27 dB)

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, THD 10%

159 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

158 g (5.6 oz)

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

170 mm (6.7 in)

Maximum output voltage, RMS

8 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°

4011A Frequency response

4011A-ddicate-4011A-Cardioid-Microphone-frequency-response.jpg

Typical on and off-axis response of a d:dicate™ 4011A Cardioid Microphone

4011A Polar pattern

4011A-ddicate-4011A-Cardioid-Microphone-polar-pattern.jpg

Typical directional characteristics of a d:dicate™ 4011A Cardioid Microphone

产品规格

Directional pattern

Wide cardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency response

20 Hz - 20 kHz

Effective frequency range, ±2 dB, at 60 cm (23.6 in)

40 Hz - 20 kHz

Sensitivity, nominal, ±2 dB at 1 kHz

10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))

Equivalent noise level, ITU-R BS.468-4

Typ. 25 dB (max. 27 dB)

Distortion, THD < 1%

136 dB SPL RMS, 139 dB SPL peak

Dynamic range

Typ. 121 dB

Max. SPL, THD 10%

159 dB SPL peak

Switchable attenuator, filters etc.

0 dB / -20 dB

Rated output impedance

200 Ω

Minimum load impedance

2 kΩ

Cable drive capability

100 m (328 ft)

Output balance principle

Impedance balancing with Active Drive

Common mode rejection ratio (CMRR)

> 60 dB

Power supply (for full performance)

P48 (Phantom Power)

Current consumption

2.8 mA

Connector

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color

Matte black

Weight

158 g (5.6 oz)

Microphone diameter

19 mm (0.75 in)

Capsule diameter

19 mm (0.75 in)

Microphone length

170 mm (6.7 in)

Maximum output voltage, RMS

8 V

Polarity

+V at pin 2 for positive sound pressure

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

Matching tolerance (frequency response and sensitivity)

±1 dB

Phase deviation for kit

< 10°

4015A Frequency response

4015-ddicate-4015-Wide-Cardioid-Microphone-frequency-response.jpg

Typical on and off-axis response of a 4015A

Polar pattern

Typical directional characteristics of a 4015A

产品规格

Directional pattern

Omnidirectional

Principle of operation

Pressure

Cartridge type

Condenser w. stainless steel diaphragm

Frequency response

20 Hz - 20 kHz

Effective frequency range ±2 dB

20 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz

Sensitivity, nominal, ±2 dB at 250 Hz

70 mV/Pa; -23 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Max. 8 dB(A) re. 20 µPa

Equivalent noise level, ITU-R BS.468-4

Max. 20 dB

Distortion, THD < 1%

123 dB SPL RMS, 126 dB SPL peak

Dynamic range

Typ. 118 dB

Max. SPL, THD 10%

134 dB SPL peak

Rated output impedance

< 200 Ω

Cable drive capability

100 m (328 ft)

Power supply (for full performance)

Via external Power supply

Current consumption

2.2 mA

Connector

3-pin XLR-M

Weight

190 g (6.7 oz)

Capsule diameter

24 mm (1 in)

Microphone length

170 mm (6.7 in)

Temperature range

-40°C to 45°C (-40°F to 113°F)

Relative humidity (RH)

Up to 90%

4041-SP Frequency response

4041-SP-ddicate-4041-SP-Large-Diaphragm-Microphone-P48-frequency-response.jpg

Typical on and off-axis response of a 4041-SP

Polar pattern

TyTypical on and off-axis response of a 4041-SP

去哪里买

你准备好买 DPA 话筒或它的配件吗? 让我们帮您找最接近您的商店

查找商店

类近的套装

立体声对

立体声对包含已配对的话筒组、话筒夹、防风罩及其他配件。套装内的话筒均作匹配，其误差值在 ±0.5 dB 或 ±1 dB 内(视乎不同套装)。4006、2011、2006、4007、4011 或 4015 均提供立体声套装

了解更多，配置您的立体声对

登記DPA通讯

抢先了解我们的新产品、工作坊、活动、比赛游戏及优惠等。

提交

DPA Microphones, Inc.

1500 Kansas Avenue, Unit 3A
Longmont, CO 80501
USA

Tel. +1 303-485-1025
联系我们

Support

联系我们客户服务去哪里买